推荐产品

HRSS-150型 数显洛氏表面洛氏硬度计(全洛氏) 硬度计

HRSS-150型数显洛氏表面洛氏硬度计(全洛氏)

HRSS-150 Digital Display Rockwell Superficial Rockwell hardness (full Rockwell)

产品简介/ Product introduction：

HRSS-150型数显洛氏表面洛氏硬度计(全洛氏)是国内首创集洛氏硬度和表面洛氏硬度于一体的新型硬度计，独特的结构设计和微处理系统，使该机技术性能达到国际水平。其初试验力和总试验力可同步切换，力值的精确，极高的测量精度、示值重复性好。

HRSS-150型数显洛氏表面洛氏硬度计采用5.2寸大屏幕液晶显示、操作便捷、外形新颖、功能齐全、操作方便显示清晰直观、性能稳定，是集机电于一体传感器闭环系统的高新技术产品，可进行洛氏、表面洛氏全部标尺的硬度测试。并可进行标尺选择，压头匹配提示，各种硬度值对照；保持时间增减；照明和屏幕亮度调整；示值数据存、取、打印处理等各项完备的功能。还配备有RS-232接口可与计算机联动工作。是科研、实验室及各类制造业洛氏硬度测试理想的选择。

本硬度计，由于内设电脑微型程序装置，可自动控制测试周期。这个装置不仅进行上述测试周期控制和测量，而且还进行一系列辅助功能，其中包括数学（即统计）和信息技术（与周边设备界面连接）功能，还有一些技术功能，如可将所取得的硬度值换算成相应的不同硬度标准的值，或转换成最后的拉力。这些功能使此硬度计成为一台完整的多功能器件。同时由于使用容易理解和设置菜单，仍保持着一定程度的操作简便特性。

HRSS-150型数显洛氏表面洛氏硬度计适用于硬质合金，碳化物；表面淬火钢，硬化薄板，淬钢，调质钢，冷硬铸铁，铸铁，铝，铜，镁等合金钢。

HRSS-150 Digital Display Rockwell Superficial Rockwell hardness (full Rockwell) is the first set of Rockwell and Superficial Rockwell hardness tester in one of the new, unique structural design and micro-processing system, so that the technical performance reached the international level. Its initial test force and total test force can be synchronized switching, the exact value of the force, high measurement accuracy, showing good reproducibility.

HC010-HRSS-150 Digital Display Rockwell Superficial Rockwell hardness tester uses 5.2-inch large-screen LCD, easy operation, novel, fully functional, easy to operate display is clear and intuitive, stable performance, is set in one of electromechanical sensor closed loop system high-tech products, can be Rockwell, Superficial Rockwell hardness testing of all scales. Ruler can be selected to match the indenter tips, a variety of hardness control; hold time of change; illumination and screen brightness adjustment; showing the value of the data stored, take, the complete function print processing. Also equipped with RS-232 interface can be linked to work with computers. Scientific research, laboratory and manufacturing all kinds of Rockwell hardness testing the ideal choice.

The hardness, due to the micro-site computer program device can be automatically controlled test cycle. This device is not only the above test cycle control and measurement, but also a series of auxiliary functions, including mathematics (ie statistics) and information technology (connected peripherals interface) functions, there are some technical features, such as can be achieved hardness values ??converted to the corresponding values ??of different hardness standards, or converted into the final tension. These features make this hardness to become a complete multi-function devices. At the same time the use of easy to understand and set menus, still maintains a certain degree of easy operation features.

HC010-HRSS-150 Digital Display Rockwell Superficial Rockwell hardness tester for carbide, carbide; surface hardening steel, hardened sheet, quenched steel, quenched and tempered steel, chilled cast iron, cast iron, aluminum, copper, magnesium, etc. alloy steel.

适用范围/ Scope of application：

洛氏硬度计适用于黑色金属、有色金属和非金属材料的硬度测定。

适用范围:淬火、表面淬火钢,调质、退火钢,冷硬铸件,可锻铸件,硬质合金钢,铝合金,轴承钢,硬化薄钢板等。

Rockwell hardness meter is suitable for measuring the hardness of ferrous metal, nonferrous metal and nonmetal materials.

Scope of application: Hardened and surface hardened steel, quenching and tempering, annealing of steel, chilled casting, malleable cast iron, hard alloy steel, aluminum alloy, bearing steel, hardened steel sheet etc..

工作环境/ Work environment：

1、在室温10~35℃的范围内；

2、在稳固的基础上水平安装；

3、在无震动的环境中；

4、周围无腐蚀性介质；

5、室内相对湿度不大于65%；

1, in the range of room temperature 10~35℃;

2, in a stable foundation for horizontal installation;

3, in the absence of vibration environment;

4,Non corrosive medium, around;

5, the indoor relative humidity of not more than 65%;

工作原理/ Working principle：

洛氏硬度的试验原理：用金刚石圆锥体压头或一定直径的钢球压头，在初试验力F0和主试验力F1先后作用下，压入试样表面，保持一定时间，卸除主试验力，保留初试验力，此时的压入深度为h1，在初试验力作用下的压入深度为h0，它们之差e(h1—h0)来表示压痕深度的永久增量。每压入0.002mm为一个洛氏硬度单位。（图1）

洛氏硬度的计算公式：HRA、C=100—(e/0.002)

HRB=130—(e/0.002)

The test principle of Rockwell hardness: Ball indenter or certain diameter diamond cone pressure head, in the initial test force F0 and the main test force under the action of F1 successively, pressed into the surface of the sample, keep a certain time, removable main test force, retain the initial test force, indentation depth of the H1, in the initial check depth of press force is H0, and the difference between them (e H1 H0) to represent the permanent incremental indentation depth. Each press 0.002mm as a Rockwell hardness unit. (Figure 1)

The calculation formula of Rockwell hardness:

HRA, C=100 (e/0.002)

HRB=130 (e/0.002)

性能特点/ Features：

1、洛氏、表面洛氏硬度标尺的选用；共有18种标尺供选择，试验力自动选择。

2、硬度测试保持时间的选择；

3、复位、删除功能；

4、浏览硬度测试的示值；最多显示24次测量记录；

5、硬度测试结果的数据处理，并打印输出；

6、各类硬度示值之间的对照；自动换算

7、RS-232C串行通讯，供用户扩展功能

8、5.2寸大屏幕显示

1, Rockwell, Superficial Rockwell hardness scale selection; There are 18 kinds of scales are available, the test force is automatically selected.

2, hardness testing time keeping choice;

3, reset, delete function;

4, showing the value of browsing hardness testing; Up Show 24 measurement records;

5, the hardness test results of data processing and print output;

6 shows the comparison between the values ??of various types of hardness; automatically translated

7, RS-232C serial communication for users to extend the functionality

8,5.2 inch large screen display

l 结构性能：仪器有一个支撑结构，可确保广阔的操作空间面积（有用高度约300㎜，深度达200多㎜），配以良好的稳固性。这样结构，使工作区的幅度和可视度等操作要求，结合使用简便和灵活，有效地满足在不同条件下进行高精确的计量需求。

l structural performance:the instrument hasasupport structurethat ensuresbroadoperating spacearea(useful toa height of about300mm,a depth ofmore than 200mm),withgoodstability.Thisstructure, thevisibility ofsuchmagnitude andthe operational requirementsofthe work areausing a combination ofsimplicity andflexibilityto effectivelymeetthe demandfor high-precisemeasurementunder different conditions.

l 计量性能：除了上面提到的稳固性之外，我们还特别关注分辨率和测量重复性。在生产各环节都不断进行监控，这样保证了生产线上产出的仪器具有良好恒定的操作性能。

l MeasurementPerformance:In addition tothe above-mentionedstability,we arealso particularly concerned aboutthe resolution andmeasurement repeatability.Inall sectors of productionareconstantlymonitored,so thatthe output ofthe production lineto ensure theinstrument hasgoodconstant operatingperformance.

l 人文工效特性：尽管本仪器功能多种多样，仪器和操作者之间的互助关系得到改善，在使用简便和多功能之间取得最佳平衡，从而使操作机器成为一种愉快。

l Humanitiesergonomicscharacteristics: Although thisinstrumentfeaturesa wide variety, mutualrelationsbetween theinstruments andthe operatorimprovedto achieve the bestbalance betweenease of useand versatility, allowingoperation of the machinebecomes apleasure.

l 多功能与信息处理系统完美结合，只举几个例子如下：

l versatileandthe perfect combination ofan information processingsystem,onlya few examplesare as follows:

ü 仪器可以同时连接一个打印机打出结果，连接一个PC当场处理信息，也可连接一个主机控制生产周期；

ü instruments canplaysimultaneously connectaprinterresults,connect aPCon the spotto process information, can also beconnected toahost computerto controlthe production cycle;

ü 也可以将测量结果输到一个PC机里，将这样的数据直接引入一般目的运用软件（电脑传真纸、数据库、文字处理机）或专门为实验室和示范室开发的软件，而不必使用软件开发器或信息技术其他解决方法，因为太复杂也不很可靠。

ü outputsthe measurement resultcan beaPC,wheresuch datais introduced directly intothegeneral purposeapplication software(PCfax paper, database,word processor)or asoftware specificallydevelopedfor thelaboratory anddemonstration room, without having tousesoftwaredevelopmentorotheriTsolutions,because it is toocomplexnot veryreliable.

l 安全性：硬度计尽管不是一台很危险的仪器，但涉及安全性能时特别考虑到下列因素：良好的平衡性能使安装起来较容易，一起牢固地固定在底座上使装配既结实又稳定，网络电压只用于电源变压器，这样仪器任何一部分的电压均不超过24V。

l Safety:Althoughhardnessis notavery dangerousinstrument, butparticularlyrelated tothe safety performance ofthe following considerations:a goodbalance of propertiesmakesit easierto install themtogetherfirmlyfixed to the baseassemblyso thatbothsolidand stable,the networkis used only forpower transformersvoltage, the voltageof anypart ofsuchinstrumentdoes not exceed24V.

技术指标/Technical Index：

1、洛氏硬度初试验力：98.07N（10 kg）    

2、洛氏硬度总试验力：588.4（60kg）、980.7（100kg）、1471N（150kg）

3、表面洛氏硬度初试验力：29.4N（3 kg）  

4、表面洛氏硬度总试验力：147.1（15kg）、294.2（30kg）、441.3N（45kg）

5、保荷时间：0~60秒 

6、试验力加卸方式：自动

7、显示方式：带背光LCD屏、大屏幕液晶数显

8、数据处理：CPU

9、被测试件允许最大高度：   180mm

10、压头中心到机壁最大距离：160mm

11、电源电压：AC220V±5%；50HZ~ 60HZ

12、外形尺寸：230*930*615mm

13、净重：110kg

14、使用环境：温度：10-40℃；湿度：20-90%，不能冷凝。

1, the beginning of Rockwell hardness test force: 98.07N (10 kg)

2, Rockwell hardness test force: 588.4 (60kg), 980.7 (100kg), 1471N (150kg)

3, the surface Rockwell hardness test force early: 29.4N (3 kg)

4, the surface Rockwell hardness test force: 147.1 (15kg), 294.2 (30kg), 441.3N (45kg)

5, Dwell time: 0 to 60 seconds

6, the test force unloading mode: Auto

7, Display: Backlit LCD screen, large LCD digital display

8, the data processing: CPU

9, was allowed to test the maximum height: 180mm

10 the maximum distance to the center of the indenter machine wall: 160mm

11, supply voltage: AC220V ± 5%; 50HZ ~ 60HZ

12, Dimension: 230 * 930 * 615mm

13, Weight: 110kg

14, use of the environment: Temperature: 10-40 ℃; Humidity :20-90%, non-condensing.

标准配置/ Standard configuration：

客户名录：

详见公司客户名录

、、、、、、

质量保证：

本公司保证交付的硬度计执行标准:金属洛氏硬度实验GB/T230-2002国家标准、JJG112-2003金属洛氏硬度计检定规程、JJG 152-1991金属表面洛氏硬度计检定规程，参照ISO6508-2:1999国际标准。精度达到合同要求。生产研发过程严格执行ISO9001:2000质量管理体系.

We guarantee delivery of performance standards hardness: Rockwell hardness test GB/T230-2002 metal national standards, JJG112-2003 Metal Rockwell hardness test procedures, JJG 152-1991 metal surface Rockwell hardness test procedures, referring to ISO6508-2:1999 international standards. Accuracy requirements of the contract. Production and development process strictly implement ISO9001: 2000 quality management system.